Saturday, May 6, 2017

G928TUVU4EQC6 Galaxy S6 edge+ SM-G928T T-Mobile Android 7.0 Nougat Stock Firmware

G928TUVU4EQC6 Official Android 7.0 Nougat firmware released on T-Mobile Galaxy S6 edge+ SM-G928T. Since this is the first Nougat released build, it simply means it can be rooted, and downgradeable. Yup, you can still downgrade from Android 7.0 Nougat G928TUVU4EQC6 back to Android 6.0.1 Marshmallow G928TUVS4DQA1 only, it did not worked out on G928TUVU4DQC2. Again, you may only try to do it according to your own will.

What’s New:

  • Android 7.0 Nougat Upgrade

  • Bunch of new features and system improvements


Firmware version details:

  • Device: Galaxy S6 edge plus (T-Mobile)

  • Android version: 7.0

  • Android security patch level: March 1, 2017

  • Baseband version: G928TUVU4EQC6

  • Kernel version: 3.10.61-10809541

  • Build number: NRD90M.G928TUVU4EQC6

  • AP: G928TUVU4EQC6

  • CP: G928TUVU4EQC6

  • CSC: G928TTMB4EQC6


Download G928TUVU4EQC6 Stock Firmware:


NON-Wipe Original Packed - [Download]


Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Just click on the AP button then select and load the stock firmware.
    G928TUVU4EQC6_G928TTMB4EQC6_G928TUVU4EQC6_Home.tar.md5


  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

How to Root T-Mobile Galaxy S6 edge+ SM-G928T G928TUVU4EQC6 Android 7.0 Nougat Update?



  • Grab the TWRP recovery here

  • and SuperSU here


For rooting you should only use the new version of SuperSU and the TWRP recovery. Again, I'm only pointing out this particular build version G928TUVU4EQC6, it may no longer works on any future updates. Again, rooting your device is solely at your own risk.

source

Wednesday, May 3, 2017

N920AUCS4EQD1 Android 7.0 Nougat Firmware with April Security Patch Update for AT&T Galaxy Note5

AT&T Galaxy Note 5 SM-N920A Android 7.0 Nougat Firmware update version N920AUCS4EQD1. This version includes April 1, 2017 Android Security Patch Level.

  • Device name: SAMSUNG-SM-N920A (AT&T)

  • Android version: 7.0 (Nougat)

  • Android Security patch level: April1, 2017

  • Baseband version: N920AUCS4EQD1

  • Kernel version: 3.10.61-10809541

  • Build number: NRD90M.N920AUCS4EQD1

  • CP N920AUCS4EQD1

  • CP N920AUCS4EQD1

  • CSC N920AATT4EQD1


Download N920AUCS4EQD1Android 7.0 Nougat Stock Firmware:



  • N920AUCS4EQD1 SD-card/ADB sideload - (Link)

  • N920AUCS4EQD1 Odin Firmware - (soon)




Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load each one of the stock firmware packages to Odin’s designated button.

    • BL_N920AUCS4EQD1_CL10809541_QB12921033_REV00_user_low_ship.tar

    • AP_N920AUCS4EQD1CL10809541_QB12921033_REV00_user_low_ship_meta.tar

    • CP_N920AUCS4EQD1_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar

    • CSC_ATT_N920AATT4EQD1_CL10809541_QB12921033_REV00_user_low_ship.tar



  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

Tuesday, May 2, 2017

N920CXXU3CQD1 Galaxy Note5 SM-N920C Android 7.0 Nougat with April 2017 Security Update

The Galaxy Note 5 SM-N920C has gotten an update to version N920CXXU3CQD1. It is another round of Android 7.0 Nougat update but includes the April 2017 Android security patches.

  • Device: Galaxy Note5

  • Model number: SM-N920C

  • Android version: 7.0 (Nougat)

  • Android security patch level: April 1, 2017

  • Baseband version: N920CXXU3QC3

  • Kernel version: 3.10.61-10809520

  • Build number: NRD90M.N920CXXU3CQD1

  • Build date: Tue 4 Apr 2017

  • AP N920CXXU3CQD1

  • CP N920CXXU3QC3

  • CSC N920COJV3CQC8


Download Android 7.0 Nougat Firmware N920CXXU3CQD1 for Galaxy Note 5 SM-N920C



Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t

Android 7.0 Nougat Features:



  • Improved UX fro better usability

  • Improved multi-tasking

    • Quick switch: double-tap the “Overview” button to switch between your two most recently used apps

    • Split-screen Multi-Window mode: open compatible applications side by side

    • “Clear all” function: close all running applications



  • Improved Doze mode puts stationary devices into deep standby mode to further extend battery life

  • Redesigned notifications panel

    • Direct reply: answer messages within the notification bar without leaving your current application

    • Bundled notifications: see grouped alerts that can be expanded





  • Future-proofing for Voice and Video over LTE (VoLTE)

  • Android security patches


How to Manually Update a Galaxy Note 5 SM-N920C to Official Android 7.0 Nougat Firmware


Grab These Tools



  1. Odin3_v3.11.1 downloader or the latest version

  2. USB Driver – only needed if you haven’t installed the latest Samsung Smart Switch in your PC.


Prerequisites:


Before proceeding prepare these necessary things as follows so you’ll not messed-up your phone if something might went wrong:

Backup all your personal data – Use “Samsung Smart Switch for PC (Google it) to easily make a backup of your Contacts, Messages, Applications, Pictures, and Videos, so that you will not lose it. You must do this because the recent firmware packages will wipe out your device stored data.

Recharge the device battery – Make sure that your Galaxy Note 5 battery is fully recharged to ensure its stability. A power failure during the installation process may harm your device.

Prepare a PC as this process will not tend to work in Mac computers.

Enable OEM unlock mode – This thing wan’t there before during the old times, but if this feature is already enabled in your device. Just go to Settings > About device > then look for the firmware’s Build number and then tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer!”. Then hit back in Settings > About device > Developer option > OEM Unlock.

Extract/Unzip the download stock firmware


Extract the downloaded firmware. Use any decompressing program you have had in your computer.

Reboot the Galaxy Galaxy Note 5 into Download mode


To reboot the Samsung Galaxy Note 5 into Download Mode: Turn it Off first. Now, Press and hold the Volume Down, HOME and Power ON button at the same time. You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears. If you can’t get into it, repeat the 3-button combination again and again.

Run and Configure Odin3 Flasher


Run Odin3 flasher program. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

Load the firmware N920CXXU3CQD1 binary tarballs in Odin’s AP button. Once loaded, you need to wait for a while as Odin3 will check the files compatibility and authenticity.
N920CXXU3CQD1_N920COJV3CQC8_ Home.tar

Connect the Galaxy Note 5 edge into the computer


Connect the Galaxy Note 5 to the computer using the supplied USB data cable. In Odin window, the ID: COM box will turn to a bluish color when the phone is properly connected and it’s an indication that it’s recognized with Odin. It also states as “Phone Added! in the log-cat.

Begin flashing the stock firmware


When all is set and you are ready into flashing just simply tick the ‘START’ button located at the lower part of Odin.

Wait until it says Pass!!


Odin3 will display a message that says “PASS!” when the process finishes. Wait until the phone completely reboots, then unplug it from the computer. However, if you might get the error message “FAILED!” you may check the troubleshooting procedures down below.

Perform factory data reset or wipe data cache partition once a fresh firmware were installed. This method can fix any lag issues. To do this, just press and hold the Volume Home, HOME and Power ON button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe Wipe System Cache/Partition if some issues still exists.

Also, you must update all of your pre-installed 3rd-party apps in the phone, as it causes some problems when it’s no longer compatible with the new Android 7.0 Nougat OS on the Galaxy Note 5 N920C.

Source

Saturday, April 29, 2017

Install G925W8VLU5DQD1 Android 7.0 Nougat on Galaxy S6 edge G925W8 Canada Variant

Download and install the official Android 7.0 Nougat firmware update version G925W8VLU5DQD1 for Canadian version of the Galaxy S6 edge SM-G925W8. The Android 7.0 Nougat it includes new features, various system improvements, and the April 1, 2017 Android security patch level.

Galaxy S6 edge SM-G925W8 Firmware version G925W8VLU5DQD1



  • Device name: Galaxy S6 edge (Canadian Carriers)

  • Model number: SM-G925W8

  • Android security patch level: April 1, 2017

  • Baseband version: G925W8VLU5DQD1

  • Kernel version: 3.10.61-11094325

  • Build number: NRD90M.G925W8VLU5DQD1

  • AP: G925W8VLU5DQD1

  • CP: G925W8VLU5DQD1

  • CSC: G925W8OYA5DQD1


What’s New:

  • Android 7.0 Nougat upgrade

  • Samsung Cloud

  • Samsung Pass

  • New UX and various performance modes

  • Notification feature and Quick settings button

  • Multi-window Split Screen

  • Always On Display

  • Various system improvements

  • April 1, 2017 Android security patches


Download G925W8VLU5DQD1 Android 7.0 Nougat Stock Firmware:


Note: These are Non-Wipe Firmware Packages or Single tarball.

Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.Quick Guide on How to Install a Stock FirmwareTools:

  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:

  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:

  • Extract/Unzip the download stock firmware.

  • Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  • Load the stock firmware package in Odin’s AP button.
    “G925W8VLU5DQD11_G925W8OYA5DQD1_G925W8VLU5DQD1_Home.tar.md5”

  • Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  • Connect the device into the computer using the supplied USB data cable.

  • Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

Install G920W8VLU5DQD4 Android 7.0 Nougat on Galaxy S6 G920W8 Canadian's Variants

For all Canadian owners of the Galaxy S6 SM-G920W8 here's the first official Android 7.0 Nougat firmware update version G920W8VLU5DQD4.  The Android 7.0 Nougat it includes new features, various system improvements, and the April 1, 2017 Android security patch level.

Galaxy S6 SM-G920W8 Firmware version G920W8VLU5DQD4



  • Device name: Galaxy S6 (Canadian Carriers)

  • Model number: SM-G920W8

  • Android security patch level: April 1, 2017

  • Baseband version: G920W8VLU5DQD4

  • Kernel version: 3.10.61-11094681

  • Build number: NRD90M.G920W8VLU5DQD4

  • AP: G920W8VLU5DQD4

  • CP: G920W8VLU5DQD4

  • CSC: G920W8OYA5DQD4


What’s New:

  • Android 7.0 Nougat upgrade

  • Samsung Cloud

  • Samsung Pass

  • New UX and various performance modes

  • Notification feature and Quick settings button

  • Multi-window Split Screen

  • Always On Display

  • Various system improvements

  • April 1, 2017 Android security patches


Download G920W8VLU5DQD4 Android 7.0 Nougat Stock Firmware:


Note: These are Non-Wipe Firmware Packages or Single tarball.



Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load the stock firmware package in Odin’s AP button.
    “G920W8VLU5DQD4_G920W8OYA5DQD4_G920W8VLU5DQD4_Home.tar.md5”

  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

Install G925VVRS4DQD1 Android 7.0 Nougat on Verizon Galaxy S6 edge G925V

Verizon Galaxy S6 edge SM-G925V first official Android 7.0 Nougat firmware update version G925VVRS4DQD1.  The Android 7.0 Nougat it includes new features, various system improvements, and the March 1, 2017 Android security patch level.

Galaxy S6 SM-G925V Firmware version G925VVRS4DQD1



  • Device name: Galaxy S6 edge (Verizon)

  • Model number: SM-G925V

  • Android version: 7.0 (Nougat)

  • Android security patch level: April 1, 2017

  • Baseband version: G925VVRS4DQD1

  • Kernel version: 3.10.61

  • Build number: NRD90M.G925VVRS4DQD1

  • AP: G925VVRS4DQD1

  • CP: G925VVRS4DQD1

  • CSC: G925VVZW4DQD1


What’s New:

  • Android 7.0 Nougat upgrade

  • Samsung Cloud

  • Samsung Pass

  • New UX and various performance modes

  • Notification feature and Quick settings button

  • Multi-window Split Screen

  • Always On Display

  • Various system improvements

  • April 1, 2017 Android security patches


G925VVRS4DQD1 Android 7.0 Nougat Stock Firmware:


→ Non-Wipe Packaged Single tarball [Download]



Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load the stock firmware package in Odin’s AP button.
    “G925VVRS4DQD1_G925VZW4DQD1_G925VVRS4DQD1_Home.tar.md5”

  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

Install G920VVRS4DQD1 Android 7.0 Nougat on Verizon Galaxy S6 G920V

Install the official Android 7.0 Nougat firmware update version G920VVRS4DQD1 on Verizon Galaxy S6 SM-G920V.  The G920VVRS4DQD1 is the first Nougat released build and it includes new features, various system improvements, and the March 1, 2017 Android security patch level.

Galaxy S6 SM-G920V Firmware version G920VVRS4DQD1



  • Device name: Galaxy S6 (Verizon)

  • Model number: SM-G920V

  • Android version: 7.0 (Nougat)

  • Android security patch level: April 1, 2017

  • Baseband version: G920VVRS4DQD1

  • Kernel version: 3.10.61

  • Build number: NRD90M.G920VVRS4DQD1

  • AP: G920VVRS4DQD1

  • CP: G920VVRS4DQD1

  • CSC: G920VVZW4DQD1


What’s New:

  • Android 7.0 Nougat upgrade

  • Samsung Cloud

  • Samsung Pass

  • New UX and various performance modes

  • Notification feature and Quick settings button

  • Multi-window Split Screen

  • Always On Display

  • Various system improvements

  • April 1, 2017 Android security patches


G920VVRS4DQD1 Android 7.0 Nougat Stock Firmware:


→ Non-Wipe Packaged Single tarball [Download]



Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load the stock firmware package in Odin’s AP button.
    “G920VVRS4DQD1_G920VZW4DQD1_G920VVRS4DQD1_Home.tar.md5”

  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

Install G925PVPU4DQC7 Android 7.0 Nougat on Sprint Galaxy S6 edge SM-G925P

Grab the official Android 7.0 Nougat firmware update version G925PVPU4DQC7 Sprint Galaxy S6 edge SM-G925P. The G925PVPU4DQC7 is the first Nougat released build and it includes new features, various system improvements, and the March 1, 2017 Android security patch level

Galaxy S6 edge SM-G925P Firmware version G925PVPU4DQC7



  • Device: Galaxy S6 edge (Sprint)

  • Model number: SM-G925P

  • Android version: 7.0 (Nougat)

  • Android security patch level: March 1, 2017

  • Baseband version: G925PVPU4DQC7

  • Kernel version: 3.10.61-10994289

  • Build number: NRD90M.G925PVPU4DQC7

  • AP: G925PVPU4DQC7

  • CP: G925PVPU4DQC7

  • CSC: G925PVPU4DQC7


What’s New:

  • Android 7.0 Nougat upgrade

  • Samsung Cloud

  • Samsung Pass

  • New UX and various performance modes

  • Notification feature and Quick settings button

  • Multi-window Split Screen

  • Always On Display

  • Various system improvements

  • March 1, 2017 Android security patches


Download G925PVPU4DQC7 Android 7.0 Nougat Stock Firmware:


→ Non-Wipe Packaged [Download]
<

Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load the stock firmware package in Odin’s AP button.
    “G925PVPU4DQC7_G925PSPT4DQC7_G925PVPU4DQC7_Home.tar.md5”

  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

Install G920PVPU4DQC7 Android 7.0 Nougat on Sprint Galaxy S6 SM-G920P

Here goes Sprint Galaxy S6 SM-G920P official Android 7.0 Nougat firmware version G920PVPU4DQC7. The latter brings new features, various system improvements, and the March 1, 2017 Android security patch level

Galaxy S6 SM-G920P Firmware version G920PVPU4DQC7



  • Device: Galaxy S6 (Sprint)

  • Model number: SM-G920P

  • Android version: 7.0 (Nougat)

  • Android security patch level: March 1, 2017

  • Baseband version: G920PVPU4DQC7

  • Kernel version: 3.10.61-10994289

  • Build number: NRD90M.G920PVPU4DQC7

  • AP: G920PVPU4DQC7

  • CP: G920PVPU4DQC7

  • CSC: G920PVPU4DQC7


What’s New:

  • Android 7.0 Nougat upgrade

  • Samsung Cloud

  • Samsung Pass

  • New UX and various performance modes

  • Notification feature and Quick settings button

  • Multi-window Split Screen

  • Always On Display

  • Various system improvements

  • March 1, 2017 Android security patches


Download G920PVPU4DQC7 Android 7.0 Nougat Stock Firmware:


G920PVPU4DQC7 Firmware (Non-Wipe Packaged)


Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load the stock firmware package in Odin’s AP button.
    “G920PVPU4DQC7_G920PSPT4DQC7_G920PVPU4DQC7_Home.tar.md5”

  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source

G925TUVU5EQC2 T-Mobile Galaxy S6 edge G920T Android 6.0.1 Marshmallow Stock Firmware

T-Mobile has rolled out another round of Android 6.0.1 Marshmallow update on Galaxy S6 edge G925T. This update is labeled as version G925TUVU5EQC2, and it brings the March 1, 2017 Android security patch level and various system improvements.

Galaxy S6 edge SM-G925T Firmware version G925TUVU5EQC2



  • Device Galaxy S6 edge SM-G925T

  • Android version 6.0.1 Marshmallow

  • Android security patch level March 1, 2017

  • Baseband version G925TUVU5EQC2

  • Kernel version 3.10.61-9756325

  • Build number MMB29K.G925TUVU5EQC2

  • AP: G925TUVU5EQC2

  • CP: G925TUVU5EQC2

  • CSC: G925TTMB5EQC2


What’s New:

  • Various system improvements

  • March 1, 2017 Android security patches


Download G925TUVU5EQC2 Android 6.0.1 Marshmallow Stock Firmware:


G925TUVU5EQC2 Firmware (Non-Wipe Packed)



 

Note: The stock firmware is for advanced users only or so-called Android ninjas. If you haven’t modified your device, you may simply take the update via Over-The-Air. Anyways, flashing the stock firmware will not tripped the KNOX app nor void the warranty of your device, since it’s the official firmware built by Google and Samsung. So it means you can use the stock firmware to manually update your device if ever it hasn’t available in the country you’re in.

Quick Guide on How to Install a Stock Firmware


Tools:



  • Odin Flasher– Select the Odin version to flash the firmware version.

  • USB Driver – Only needed if you haven’t installed the Smart Switch for PC.


Prerequisites:



  • Backup all the important data or files that were stored in your phone’s internal memory.

  • Recharge the phone or it should have at-least around 50% remaining power.

  • Activate USB debugging mode. Go to Settings > About device > then look for the firmware build number and then Tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer”.

  • TURN OFF the Reactivation Lock – from Home screen tap on Settings > Security > Reactivation Lock and then uncheck the Reactivation lock option.


Procedures:



  1. Extract/Unzip the download stock firmware.

  2. Run and Configure Odin Flasher. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

  3. Load the stock firmware package in Odin’s AP button.
    “G920TUVU5EQC2_G920TTMB5EQC2_G920TUVU5EQC2_Home.tar.md5”

  4. Reboot the device into Download Mode. Turn it Off first. Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

  5. Connect the device into the computer using the supplied USB data cable.

  6. Begin Flashing. Tick the ‘START’ button.


DO NOT disconnect nor do anything when the phone is already in download mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. If you get failed errors, check the USB connection condition, repeat the whole process. Wait until the phone completely reboots before you unplug it from the computer.

Tips: Though this is just an optional one, but this method has been proven effective and we’ve still used it for a quite some time now. This process will get rid of some issues and you’ll gain a much cleaner and fresher firmware installation. But then again, you must have created a backup of your data stored in your phone’s internal memory before doing so. You may then perform factory data reset right after the new firmware installation. To do this, just press and hold the Volume Home, HOME and Power button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe System Cache/Partition if some issues still persists.

source