Saturday, July 21, 2012

T-Mobile Samsung Galaxy S3 ICS 4.0.4 I9300XXBLFB Stock ROM

These are the original I9300XXBLFB firmware build with baseband modem number I9300BOLF1 ICS 4.0.4 stock ROM for T-Mobile Samsung Galaxy S3 (Samsung Galaxy S III GT-I9300)  carrier network branded version.

This has been released by Samsung on July 2012, an update from previous build I9300XXALE8.

These stock ROM files has been useful to return back the device to it’s original factory default firmware settings, as well as fixing unwanted soft-bricks if you messed-up by installing a zip files. So, this is only useful on some other part and recover your device back to life. Please watch out the code ‘T-Mobile GT-I9300 only’ not on T-Mobile USA Samsung Galaxy S III SGH-T999 variants.

T-Mobile Samsung Galaxy S3 Stock ROM – Odin Flashable firmware

Download 3 Network Samsung Galaxy S3 Stock ROM

* These stock ROM are build and intended for use with the T-Mobile Samsung Galaxy S3 Europe version with model number GT-I9300. These stock ROMs cannot be used with T-Mobile US version Samsung Galaxy S III SGH-T999. Flashing these stock ROM on another device or model may result to undesired outcomes. So, do not ever attempt to do it.
* Read and understand the whole flashing guide first (below), before actually downloading and performing installation by these stock ROM.
* Please use these files carefully, you may proceed at your own risk!

All other Regions and Carrier Networks stock ROM can be found here>>

Grab the specific stock ROM according to your country to avoid any unexpected issues after installing.

Update: The Android 4.0.4 Firmware is no longer applicablle for the device.
You may use the new firmware updates: Galaxy S3 GT-I9300 Firmware

CountryP-CodePDACSCMODEMVersionStock ROM
T-Mobile AustriaMAXI9300XXBLFBI9300MAXLF2I9300BOLF1ICS 4.0.4-
T-Mobile Croatia CROI9300XXBLFBI9300CROLF2I9300BOLF1ICS 4.0.4-
T-Mobile Croatia CROI9300XXBLFBI9300CROLF2I9300BOLF1ICS 4.0.4-
T-Mobile Czech RepublicTMZI9300XXBLFBI9300TMZLF3I9300BOLF1ICS 4.0.4-
T-Mobile EnglandTMUI9300BVALF4I9300TMUALF29300BVLF2ICS 4.0.4-
T-Mobile GermanyDTMI9300XXBLFBI9300DTMLF6I9300BOLF1ICS 4.0.4-
T-Mobile NetherlandsTNLI9300XXBLFBI9300TNLLF2I9300BOLF1ICS 4.0.4-
T-Mobile PolandTPLI9300XXBLFBI9300TLLF3I9300BOLF1ICS 4.0.4-

Instructions in flashing I9300XXLPB Galaxy S3 Stock ROM using Odin3_v3.04 (If you want to return back your phone back to stock)

Full detailed guide for beginners

If this is your first time heard about this method, read the step by step guide first, before you may proceed installing one of these stock ROM.

Quick Guide for advance users

Ensure that the battery is fully charge.
Make a Back up copy of all important data/files stored from the phone’s internal memory.
1. Download the specific stock ROM according to your device country origin. Then extract it.
2. Download Odin3_v3.04.
3. Download USB driver (only needed if you have not previously installed Kies on your PC/laptop).
4. Run Odin3_v3.04 on PC desktop
5. Click on the PDA button then browse to the folder where you extracted the stock ROM
ex: I9300XXBLFB_I9300MAXLF2_I9300BOLF1_HOME.tar.md5
6. Do Not check the Re-Partition checkbox. Mark check these checkboxes Auto Reboot and F-Reset Time.
7. Reboot the phone in download mode: Turn it off first, then gently press and hold the Volume Down key+HOME+ Power buttons simultaneously
8. Connect the phone to PC when it’s in the Download Mode screen.
9. Hit the “START’ button.
10. Wait until a word “PASS’ appears.
11. Remove the phone from PC.
12. Do factory reset if necessary.
13. Reconfigure APN settings if necessary.

If you have any questions or in need of assistance and further instruction please don’t hesitate to leave a message on our comment form below.


Post a Comment