Install I9300XXDLJ5 4.1.1 Jellybean Official Update for India Galaxy S3

Finally! India Samsung Galaxy S3 GT-i9300 users, your Jelly bean update has arrive. A freshly packed build number of I9300XXDLJ5. This update is already spotted fro Kies server, so better check it now. The complete build info is below, this 4.1.1 Jelly bean is update from earlier build I9300XXBLH1 4.0.4 ICS.

I9300XXDLJ5 Android 4.1.1 Jelly bean

Device: Samsung Galaxy SIII GT-I9300
Model: GT-I9300
Country: India
Product Code: GT-I9300RWDINU, GT-I9300RWDINS
Modified: 2012-10-30
I9300XXDLJ5/I9300ODDDLI7/I9300DDDLJ1/I9300XXDLJ5

Users should check it out via Kies, and get your Galaxy S3 fully updated now. For those who can't get it from Kies like if your Galaxy S3 now already runs with rooted or unofficial firmware or you are outside from your home country India and living anywhere around the world, you can still get this update by using original stock ROM. Just follow our detailed guide on the next page.

Odin flashing procedure I9300XXDLJ5 4.1.1 Jelly Bean Firmware

This is a manual upgrading using the I9300XXDLJ4 stock ROM, this is the same firmware released by Samsung via Kies or OTA, but just being pulled from Samsung server so that advance users and 3rd-party developers can use it and or give it a try.

Disclaimer: Proceed at your own risk! We shall not be held responsible if something happens on your device by using this guide.

Grab Odin flasher Odin3_v3.07 link and USB driver.

Grab the Jelly Bean stock ROM:
GT-I9300 INS - INS_I9300XXDLJ5_I9300ODDDLI7
GT-I9300 INU - INU_I9300XXDLJ5_I9300ODDDLI7
- Galaxy S3 GT-I9300 Stock Firmware

Prepare things as follows:
- Fully re-charge your phone’s battery.
- Back up all important files store from your phone’s internal memory. although this will not wipe the data after installation.
- Use a good working USB cable wire,
- A computer laptop runs in Windows OS, this will not work on MAC, Samsung and Apple are not friends.
- Disable Kies and any open programs that might interrupt the process.

Step 1: Install the USB driver and Extract the downloaded I9300XXDLJ5 stock ROM

Odin can’t read the file if not extracted, so you need to “unzipped” it first, so that you’ll get the .tar.md5 binary file.

Step 2: Run and configure Odin

Just right-click Odin3_v3.07.exe and run as administrator, then configure its settings:
DO NOT Check This!!!!! “RE-PARTITION”
check these boxes “AUTO-REBOOT” and “F-RESET TIME”

Step 3: Load the binary file on PDA button

Click on the PDA button then browse to the folder where you extracted the stock ROM then select and load it.
I9300XXDLJ5_I9300ODDDLI7_I9300DDDLJ1_HOME.tar.md5

Odin should look exactly like this:

Step 4: Reboot the phone in download mode

To reboot the Galaxy S3 into  download mode , you need to turn the power off.  After it completely shut down,  just  press and hold the Volume Down key,  Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you  to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Step 5: Connect the phone to PC

When the phone is in the Download Mode screen, connect it to the computer using the USB cable, you should see an ID:COM port number and it turn to a blue color – as an indication that the phone is already recognized by Odin. Also a word “Added” on Odin’s log box”

Step 6: Hit the “START’ button

Once all properly set and ready to flash, just hit the “START” button below odin’s window.

Step 7: Wait for a word “PASS’

At the end of the flashing process, a word “PASS” will display and this means that the installation is already finishes.
Juts wait until the phone, completely normally reboots, then remove it from PC connection.

You may then confirm the newly installed Jelly Bean from your Samsung Galaxy S3:
About>Settings> Firmware info or type *#1234# and see if it’s already I9300XXDLJ4  firmware build.

If you already got this update just share it to us your impressions  on how does firmware works like performance and any other issues you may encounter.