Monday, March 3, 2014

Install I9505XXUFNB9 Galaxy S4 (GT-I9505) Official 4.4.2 KitKat Firmware


Another Samsung Galaxy S4 LTE (GT-I9505) official 4.4.2 KitKat update firmware with build number I9505XXUFNB9, now seen hitting Nordic Countries. This is the second KitKat firmware officially rolled out by Samsung next to the first build I9505XXUFNB8 that has seen released in Germany.  Again,  the 4.4.2 KitKat update has been released in waves and might take few more days before it arrives to any other countries.

The I9505XXUFNB9 4.4.2 KitKat update on Galaxy S4 has the same features found on Galaxy Note 3 KitKat update, like the new camera shortcut in lockscreen, white status bar icons. There are new bloats we’ve found the Books and Audiobooks but some features like the Album Art is still missing but there are some improvements in the camera and the touchwiz launcher.

The I9505XXUFNB9 can be downloaded through Samsung Kies. Below are the official firmware build I9500XXUFNB9 4.4.2 KitKat for advanced users that wants to update right now, without waiting before it appears on Kies.

Do this before Flashing the Stock I9505XXUFNB9 4.4.2 Firmware

Disclaimer: Use of this method is solely at your own risk! Please proceed with precautions, for we will not take any responsibility if anything happens to your device by using this guide.

  • Make sure that your Galaxy S4 is fully charge.

  • Stock Firmware packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your phone’s stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc.  before flashing no-matter if it is Full-WIpe or Non-Wipe,  just to be safe and ensure that your stored data are in  safe  if something went wrong during the flashing process.

  • Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serialport.  Odin will not work on MAC OS.

  • Use the supplied USB cable for your Galaxy S4.

  • Enable USB debugging from your phone’s settings – while if you are on 4.3 just hit Settings>About Phone> then scroll down to the build number and tap that number for around 7-times ’til the Developer option appear.

  • Ensure that KIES is closed and not running in the system tray! Kies and Odin are both created by Samsung but Kies will interrupt and doesn’t like Odin, it will block you from flashing.

The Android 4.4.2 KitKat now comes with a new protected bootloader that might cause issues when you try to downgrade to the old software updates. This also applies if you are planning into rooting and installing any custom recovery and any unsigned firmware once you are on 4.4.2 KitKat, so please be aware with that.
Will this trip KNOX warranty void flag counter to 0×1?
Nup, this a official and signed firmware from Samsung, so flashing official firmware will not trip KNOX.
My Galaxy S4 is rooted, will I lose root?
If your device is currently rooted you will lose root after flash, but you can still root it again if you want.d tools for flashing

Download Galaxy S4 GT-I9505 (Snapdragon) I9505XXUFNB9 4.4.2 Stock or Official  Firmware.

Device name: Samsung Galaxy S4 LTE (Snapdragon)
Model number: GT-I9505
Country:  Finland, Sweden, Denmark, Norway, Iceland, Faroe Islands
Carrier: Unlocked or SIM-Free SGS4
Android version: – 4.4.2 (KitKat)
Baseband version: I9505XXUFNB9
Kernel version:  3.4.5-481100 dpi@SWDD5015 #1
Build number: KOT49H.I9505XXUFNB9
Build date: Feb 14, 2014
Release date: Feb 25, 2014

Stock I9505XXUFNB9 4.4.2 firmwares: 
Nordic countries - I9505XXUFNB9_NEE
Germany (O2 - GT-i9505 4.4.2 I9505XXUFNB9_VIA
UK (O2) - GT-i9505 4.4.2 I9505XXUFNB9_O2U
Czech Republic - GT-i9505 4.4.2 I9505XXUFNB9_ETL
Greece - GT-i9505 4.4.2 I9505XXUFNB9_I9505EURFNB1_EUR
Hungary - GT-i9505 4.4.2 I9505XXUFNB9_I9505OXXFNB2_XEH
Luxembourg - GT-i9505 4.4.2 I9505XXUFNB9_I9505OXXFNB2_LUX
Romania - GT-i95054.4.2 I9505XXUFNB9_I9505OXXFNB2_ROM
Romania (Orange) - GT-i9505 4.4.2 I9505XXUFNB9_I9505OROFNB2_ORO
Spain - GT-i9505 4.4.2 I9505XXUFNB9_I9505OXXFNB2_PHE
South East Europe - 4.4.2 I9505XXUFNB9_I9505OXXFNB2_SEE
Slovenia - GT-i9505 4.4.2 I9505XXUFNB9_I9505OXXFNB2_SIO
Switzerland - GT-i9505 4.4.2 I9505XXUFNB9_I9505AUTFNA2_AUT

Odin3.v3.09 find here
USB driver link are here

Install the Galaxy S4 USB driver

Install the USB Driver first to get rid of flashing failures.  You may also  need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.

Run and Configure Odin

Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3) , ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot your Galaxy S4 (I9505) into Download Mode

To reboot the Galaxy S4 into  download mode , you need to turn the power off.  After it completely shut off,  just  press and hold the Volume Down key,  Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you  to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop

Once you already reboot the phone in download mode,  simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port numberand a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the stock  I9505XXUFNB9 4.4.2 Android KitKat firmware file

The stock firmware is pack in a single .tar.md5 file only.  Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.

Start Flashing or Installing the stock firmware

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cableor turning off the device. Just wait until it completely finish.

Wait ’till it PASS!!

When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed  (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

Confirm if you successfully installed the stock firmware
Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.
You can also do factory reset by dialing *2767*3855#.

Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolved it.

Q: I got an error message that says “Set-up connection Failed” ?
A: 1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and or try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, it isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs. Also try to use another computer or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: This eventually happens if your device came from custom firmware but you can fix it viarecovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Galaxy S4 in Normal mode.

That’s it! If you found some interesting features, including bugs and other issues to this I9505XXUFNB9 4.4.2 KitKat update, just drop it on our comment form below.


  1. Hi there, how can one identify if a stock Samsung ROM is "Full-Wipe" or "Non-Wipe"?

  2. Most single .tar file are no-wipe.

  3. I'm a bit confused right now. I flashed the leaked I9505XXUFNA5 firmware and my phone worked normally although it's locked by my carrier. Would it work also normally if I flash this firmware?
    Thanks in advance.

  4. Any idea about the update for Galaxy S4 SGH-I337m (LTE)?

  5. You've said that you've flashed the leaked version, so does the official update will work too.

  6. Canadian Galaxy S4 variants are also getting closer. Let's wait until all U.S variants gets an update.

  7. chan nyein paingJune 13, 2014 at 8:23 PM

    You’ve said that you’ve flashed the leaked version, so does the official update will work too.

  8. Forgive me wrong thread, this is OK do not worry was a mistake I am very sorry.