Sunday, September 14, 2014

Install P5200XXUBNG2 Samsung galaxy tab 3 10.1 gt-p5200 4.4.2 firmware update

First Android 4.4.2 KitKat Update build number P5200XXUBNG2 on Samsung Galaxy Tab 3 10.1 GT-P5200 (WiFi+3G) has finally rolled out. Unfortunately, the first Android 4.4.2 P5200XXUBNG2 firmware is carrier branded and belongs to a certain network operator in Europe. That simply means that all unbranded Samsung Galaxy Tab 3 10.1 GT-P5200 may still need to wait for a while. On the other hand, the Samsung Galaxy Tab 3 10.1 GT-P5210 has been also receiving the 4.4.2 update including the Galaxy Tab 3 10.1 LTE version GT-P5220.



For those advanced users who might want to give it a try now, you can simply grab the official 4.4.2 firmware build P5200XXUBNG2 and then manually upgrade your devices in no time.

Again, this update is now available in Spain and can be seen via over-the-air through WiFi connection or using Samsung Kies. Those who have been rooted and modified their Samsung Galaxy Tab 3 10.1 GT-P5200 and now wants to return back to official 4.4.2 firmware then this guide is for you. You will lose root once you install back the official firmware but the Android 4.4.2 update can be rooted.

Again, the firmware build below is a carrier branded, but I will update this post to add the unbranded ones with similar firmware build to 4.4.2 P5200XXUBNG2.
A carrier branded will also work on unbranded devices but you'll also get the carrier welcome screen logo, carrier bloatwares or apps once installed.

Firmware build details of the 4.4.2 KitKat P5200XXUBNG2:

Model number: GT-P5200
Android version: 4.4.2
Baseband version: P5200XXUBNG2
Kernel version: 3.4.34 - 2281395
Build number: KOT49H.P5200XXUBNG2
CSC: P5200AMNBNG1 (Orange)

Some Changes of P5200XXUBNG2 4.4.2 Update:

• Android 4.4.2 (KitKat OS)
• Lockscreen shortcut
• White Status Bar icon
• Blocking Mode
• Hands Free Mode
• Voice Control
• Cloud printing
• Screen Rotation
• Improved Stability
• Security Enhancement
• find out more..

The stock firmware below is only for those who did not get this update through ‘OTA’ over-the-air or even Kies and had faced issues like “Software Update Failed” or “This device is not supported with kies” and any similar errors. So again, if you want to have the 4.4.2 KitKat update installed on your Samsung Galaxy Tab 3 10.1 GT-P5200 just simply grab the 4.4.2 P5200XXUBNG2 stock firmware from the sources below, for this is your other last resort. One more thing, the 4.4.2 update now equipped with a secured bootloader which similarly found on 4.3 updates, some circumstances is that you cannot revert back to the older software update version, for this breaks the bootloader image once gets re-written. So make sure to be aware with that if you are planning to install any ROMs that still based on 4.3 , or 4.2.2. If you are also rooted then you’ll lose root once the 4.4.2 installation has made, that’s because official firmware wipes-out any modification you have made or installed in your device.

Manually Update Samsung Galaxy Tab 3 10.1 GT-P5200 to Official Android 4.4.2 KitKat P5200XXUBNG2 Firmware (Odin method)

Disclaimer: This method are used by Android developers and advanced users only. If ever this is your first time heard about this procedure, please make a careful research first before proceeding. We shall not be held any responsibility if anything happens to your device from using this guide. Proceed at your own risk!

Warning: This stock ROM is only compatible for Samsung Galaxy Tab 3 10.1 with GT-P5200 (International) specific model only. Do not ever try to use this firmware on other Samsung Galaxy Tab 3 10.1 variants.


Q: Will I lose root once installed the P5200XXUBNG2 4.4.2 update?
A: Yes, this will restore your device into official firmware.
Q: Can I install root again once upgraded to P5200XXUBNG2 4.4.2 KitKat version?
A: Yes, this firmware build can be rooted, but be aware about the new KNOX security platform hidden inside the system that completely voids the warranty of your device once gets tripped by means of rooting or installing any custom recovery. This sets “KNOX warranty Void: 0×1 from 0×0? (You can see this when you set your device in download mode). This cannot be reset by any hacking method except by Samsung service personnel using a special reset tool of-course.

Download the original P5200XXUBNG2 4.4.2 Stock Firmware:
Italy (Unbranded) P5200_ITV_P5200XXUBNG2 Download (link)
Slovenia (Si.mobil) - P5200_SIM_P5200XXUBNG2 Download (link)
Hungary (Vodafone) - P5200_VDH_P5200XXUBNG2 Download  (link)
Italy (Vodafone) - P5200_OMN_P5200XXUBNG2 Download  (link)
Cyprus (Cyta) - P5200_CYV_P5200XXUBNG2 Download (link)
Romania (Vodafone) - P5200_CNX_P5200XXUBNG2 Download (link)
Portugal (Vodafone) -  P5200_TCL_P5200XXUBNG2 Download (link)
Spain (Orange) - P5200_AMN_P5200XXUBNG2 Download (link)

Download Unbranded P5200XXUBNH2 4.4.2 Stock Firmware
Austria - P5200_ATO_P5200XXUBNH2 Download (link)
Hungary - P5200_XEH_P5200XXUBNH2 Download (link)
Poland - P5200_XEO_P5200XXUBNH2 Download (link)


Before you proceed prepare these necessary things as follows so you’ll not screwed-up your phone:
- Create a back-up all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
- Make sure that your Samsung Galaxy Tab 3 10.1 GT-P5200 battery is fully charged to ensure stability and to get rid pf power failure issues while updating.
- Close all software, such as KIES suite, Antivirus, firewalls, to prevent the possible conflict.
- Prepare a personal computer or laptop with Windows OS.

Stock Firmware 4.4.2 P5200XXUBNG2 Odin Flashing Procedures:

Odin downloader -  Odin3_v3.09 
USB Driver - Drivers are here

1) Extract the downloaded P5200XXUBNG2 firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have in your computer.
2) Run Odin3_v3.09 flasher program.
3) Just click on the PDA button then select and load the P5200XXUBNG2 firmware.
DO NOT check ‘Re-Partition’ option.
leave these checked: Auto Reboot and F.Reset Time check-boxes.
4) Reboot the Samsung Galaxy Tab 3 10.1 GT-P5200 into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.
5) Connect USB data cable to Phone. The ID:COM box will highlight and turn to a bluish color when the phone is properly connected and already recognized with Odin.
6) Tick the ‘START’ button when all is set and ready to begin flashing.
7) DO NOT Interrupt, touch nor do anything when the phone is already in flashing progress mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)
8.Wait until the phone completely reboots, then unplug it from PC.
Do factory reset again after flashing.
This is only optional just in-case you’ll experience bootloop and lag issues after flashing.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.

Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolved it.

Q: I got an error message that says “Set-up connection Failed” ?
A: 1.Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and or try to another USB cable
4. Re-install the USB driver.
Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, it isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs. Also try to use another computer or laptop,
Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: This is eventually happens if your device came from custom firmware but you can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Samsung Galaxy Tab 3 10.1 GT-P5200 in Normal mode.
6. If it did not resolve the issue just repeat flashing the firmware above.

That’s it! If you found some interesting features on this P5200XXUBNG2 4.4.2 KitKat update, just drop it on our comment form below.


Post a Comment