Friday, November 7, 2014

Sprint Samsung Galaxy Note 4 SM-N910P Stock Firmware N910PVPU1ANIE Original 4.4.4

This is Sprint Samsung Galaxy Note 4 SM-N910P stock firmware dubbed with build numbers N910PVPU1ANIE, just for those who might need it in-case someone need to unroot, unbrick and return back the device to official 4.4.4 firmware. The 4.4.4 N910PVPU1ANIE is the initial firmware can be found during the device market launch.  The Sprint Samsung Note 4 SM-N910P can now be rooted, then those who are rooted there might be a possibility that it will no longer receives any future software updates.

In addition, using a stock firmware is an advanced users approach to return back the device to its original factory default settings. For those who may not know that a rooted and modified phones also lose its warranty and the privilege to get an official support from the manufacturer.

Sprint Galaxy Note 4 Android  4.4.4 firmware N910PVPU1ANIE

Technical Details of Android 4.4.4 N910PVPU1ANIE Stock Firmware

Device Samsung Galaxy Note 4
Model number SM-N910P
Android version 4.4.4
Baseband version N910PVPU1ANIE
Kernel version 3.10.0-2774708 dpi@SWDD5919  #1 SMP PREEMPT Wed Sep 17 19:19:02 KST 2014
Build number KTU84P.N910PVPU1ANIE

How to manually restore Sprint Galaxy Note 4 SM-N910P to Official N910PVPU1ANIE Android 4.4.4 via Stock Firmware

Disclaimer: This method are used by Android developers and advanced users only. If ever this is your first time heard about this procedure, please make a careful research first before you proceed. We shall not be held any responsibility if anything happens to your device from using this guide. Proceed at your own risk!

Frequently Asked Questions About Stock Firmware:

Q: Will I lose root once installed the N910PVPU1ANIE update?
A: Yes, this will restore your device into official firmware.
Q: Can I install root again once upgraded to N910PVPU1ANIE 4.4.2 KitKat version?
A: Yes, this firmware build can be rooted, but be aware about the new KNOX security platform hidden inside the system that completely voids the warranty of your device once gets tripped by means of rooting or installing any custom recovery. This sets “KNOX warranty Void: 0×1 from 0×0″ (You can see this when you set your device in download mode). This cannot be reset by any means.

Where and when to use the stock firmware?

When it happens that you try to perform a software update then gets an error that says 'The operating system on your device has been modified in unauthorized way. Try downloading software updates using Samsung Kies on your PC or visit a customer service center.'

Rooted N910PVPU1ANIE Sprint Galaxy Note 4


That simply means that the device could not get the software update anymore.  So the best shot here is you need to remove root from the device by flashing the stock firmware back.


Before you proceed prepare these necessary things as follows so you’ll not screwed-up your phone:
• Create a back-up all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
• Make sure that your Sprint Samsung Galaxy Note 4 SM-N910P battery is fully charged to ensure stability and to get rid pf power failure issues while updating.
• Prepare a personal computer or laptop with Windows OS.
• Enable USB debugging mode if you are having issues connecting your device to the computer try to enable the this option. In your Sprint Samsung Galaxy Note 4 SM-N910P, go to Settings>> About device>> then look for the firmware build number and then tap that build number for around 7-times until a message pop-up that says something like “congratulations you are now a developer”.
• TURN OFF the Reactivation Lock – form Home screen tap on Settings>>Security>>Reactivation Lock and then uncheck the Turn Reactivation lock on. This is only needed if you already turned-it ON, from which you cannot modify the system when it’s turned-ON.
Galaxy Note 4 reactivation lock turn off

Grab these necessary tools

Odin downloader – Odin3_v3.07 or Odin3_v3.09 here
A USB Driver – drivers are here (only needed if you haven’t installed the latest Kies 3)
Stock Firmware 4.4.4 N910PUVU1ANIE Download page
Important Note: This stock firmware can be use only on top of any older software updates. You should not use the stock firmware for downgrading purposes on top of any newer software updates, including but not limited to such as much higher and latest than N910PUVU1ANIE and future Android 5.0 Lollipop updates.  Doing so may result into undesirable outcomes due to the new secured operating system. This specified stock firmware or so-called stock ROM is only compatible for Samsung Galaxy Note  4 SM-N910P (Sprint)  specific model only. Do not ever try to use this firmware on other Samsung Galaxy Note 4 variants, including other brands and model numbers.

Extract/Unzip the download stock firmware

Extract the downloaded N910PVPU1ANIE firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have had in your computer.

Run and Configure Odin Flasher

Run Odin3_v3.07 flasher program. In Odin widow DO NOT tick the option box that says 'Re-Partition'. Leave  'Auto Reboot' and 'F.Reset Time' check-marked by default .

Run and Configure Odin Flasher

3) Just click on the AP button then select and load the N910PVPU1ANIE stock firmware.
It reads out like this - ‘N910PVPU1ANIE_N910PSPT1ANIE_Home.tar.md5′
Once loaded you need to wait for a while as it reads out the MD5 check-sum for compatibility.

Reboot the Galaxy Note 4 in Download Mode

Reboot the Samsung Galaxy Note 4 SM-N910P into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

Connect the Note 4 into a computer

Connect  the Galaxy Note 4 to the computer using the supplied USB data cable. In Odin window, the ID:COM box will turn to a bluish color when the phone is properly connected and an indication that its recognized with Odin. It also states as "Phone Added! in the log-cat.

Begin Flashing

When all is set and ready to begin flashing; Tick the ‘START’ button located at the lower part of Odin.

Avoid Interrupting the process

DO NOT disconnect nor do anything when the phone is already in flashing mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)

Wait until it says Pass!!

Wait until the phone completely reboots, then unplug it from the computer

Troubleshooting when firmware flashing failed

Do factory reset  after flashing especially when your device previously runs on any unofficial firmware. This is process is optional but this method can get rid o unwanted bootloop and lag issues experiences after flashing. To do this;
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.

If you use this for unrooting and restoring back from custom ROM but cannot get through the during the flashing and you get Odin failed error. You may just repeat the process but make sure to check everything from USB data cable, computer's USB serial port,  USB driver try the other Odin version.  You may also sort out what root kernel and custom ROM and any modified system images you have previously used before as it also causes a flashing failure.

If you have something to add and or in need for assistance, just drop it on the comment form below.


Post a Comment