Install I337MVLUGOC4 Galaxy S4 SGH-I337M, Canada Official Lollipop Update Firmware

Canadian carriers have rolled out the official Lollipop update on Samsung Galaxy S4 SGH-1337M. The latter got the build number I337MVLUGOC4 which is base in latest Android 5.0.1 Lollipop (LRX22C).  The update is now available on Bell, Telus, Koodo, and among other Canadian network provider's branded Galaxy S4 SGH-I337M.  This is an update to the previous Android 4.4.2 KitKat build I337MVLUFNI2 way back in October last year.  It took for a while now, but it seems this is just a very surprising update since we have seen that the Galaxy S5 SM-G900W8 got the Android 5.0 Lollipop which is an older version compare to this update.

Technical Details of I337MVLUGOC4 5.0.1 Lollipop

Device name: Samsung Galaxy S4
Model number: SGH-I337M
Android version: 5.0.1 (Lollipop OS)
Baseband version: I337MVLUGOC4
Kernel version: 3.4.0-4508315
Build number: LRX22C.I337MVLUGOC4
AP: I337MVLUGOC4
CP: I337MVLUGOC4
CSC: I337MOYAGOC4

The "UGOC4" 5.0.1 Lollipop update is now available via OTA and using Samsung Kies. So for those who did not root nor modified their Samsung Galaxy S4 SGH-I337M may manually check for the update right now by going to the phone's Settings>>About device>>Check for Software update. But to those who have had a rooted Galaxy S4, and now might want to unroot and return back to stock 5.0.1 Lollipop, you may grab the stock I337MVLUGOC4 below and flash it with Odin3.

Prerequisites:

Before you proceed prepare these necessary things as follows so you’ll not mess your phone:
- Create a back-up all your personal data, like: Contacts, Messages, Applications, Pictures, and Videos, so that you will not lose it just in-case something might go wrong after the update.
- Make sure that your Galaxy S4 battery is fully re-charge to ensure stability and to get rid pf power failure issues while updating.
- Close all software, such as KIES suite, Antivirus, firewalls, to prevent the possible conflicts.
- Prepare a personal computer or laptop with Windows OS.

Odin Flashing Procedures:

Odin downloader -  Odin3_v3.09 
USB Driver - Drivers are here

Download: Stock Firmware I337MVLUGOC4
Bell - BMC_I337MVLUGOC4
Telus - TLS_I337MVLUGOC4
Koodo - KDO_I337MVLUGOC4
Virgin Mobile - VMC_I337MVLUGOC4
Sasktel - BWA_I337MVLUGOC4
(Rogers and Fido has not yet available, but might follow soon.)
Added: 
Rogers - RWC_I337MVLUGOC4
Fido - FMC_I337MVLUGOC4
Also added:
Mexico's version - MTA_I337MVLUGOC4

1) Extract the downloaded firmware or stock ROM. Use winzip, 7zip,winrar or any decompressing program you have in your computer.
2) Run Odin Downloader v3.07 flasher program.
3) Just click on the "AP button" then select and load the binary image.
‘I337MVLUGOC4_I337MOYAGOC4_I337MVLUGOC4.Home.tar.md5′
DO NOT check ‘Re-Partition’ option.
leave these checked: Auto Reboot and F.Reset Time checkboxes.
4) Reboot the Galaxy S4  into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.
5) Connect USB data cable to Phone. The ID:COM box will highlight and turn to a bluish color when the phone is properly connected and already recognized with Odin.
6) Tick the ‘START’ button when all is set and ready to begin flashing.
7) DO NOT Interrupt, touch nor do anything when the phone is already in flashing progress mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)
8.Wait until the phone completely reboots, then unplug it from your computer.

Canada’s Firmware packages are all the same build which refer to as Bell in the end-result. Just Change the CSC code according to your network provider.
(NOTE: This process will wipe data, so make a back-up first all of your important data storage.)
1. Get the IMEI number of your phone, by dialing *#06#.
2. Copy the number indicated not including the / xx.
3. Once copied go back and dial this number *#272*IMEI#.
4. Select the correct CSC for your phone’s carrier then tap install.
i.e. BMC = Bell, RWC = Rogers. TLS = Telus, FMC = Fido, and others.
5. The Phone will reset and reboot.
However, if you get bootloops or stuck at welcome screen logo, this is seemingly normal when your device came from a modified and rooted firmware. All you need to do is perform the advanced full factory reset method. This will wipe all the remaining data from your device so again, you should already have the back-up copy of all of files before doing this.
Again, this is only optional just in-case you’ll experience bootloops and lag issues after flashing.
Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresher and a cleaner firmware installation.