Saturday, July 25, 2015

N910TUVU1COD6 T-Mobile Samsung Galaxy Note 4 SM-N910T Official 5.0.1 Lollipop Stock Firmware

Android 5.0.1 Lollipop stock firmware version N910TUVU1COD6 for T-Mobile Samsung Galaxy Note 4 SM-N910T. The latter is officially sent out on April 2015 and this is the first official 5.0.1 Lollipop released build. Those advanced users who might need the full stock firmware just in case one have to unroot and restore back to official Android 5.0.1 platform.

The N910TUVU1COD6 5.0.1 Lollipop update brings stability, bug fixes, and further improvements to device performance. That 's what the initial changelog details have pointed out, but there are several new features you may find in it.

Technical Details of the N910TUVU1COD6 Update:

Device: Samsung Galaxy Note 4
Model number: SM-N910T
Android Version: 5.0.1
Baseband version: N910TUVU1COD6
Kernel version: 3.10.40-4739134
Build number: LRX22C.N910TUVU1COD6

[caption id="attachment_10693" align="alignright" width="233"]Android 5.0.1 Lollipop update version N910TUVU1COD6 Android 5.0.1 Lollipop update version N910TUVU1COD6[/caption]

How to Restore T-Mobile Galaxy Note 4 SM-N910T to Official N910TUVU1COD6 Android 5.0.1  Stock Firmware

Disclaimer: This method can be used by Android developers and advanced users only. If ever this is your first time heard about this procedure, please make a careful research first before proceeding. We shall not be held any responsibility if anything happens to your device. Use of this guide is solely at your own risk!

Where and when to use the stock firmware?

When it happens that you try to perform a software update then gets an error that says ‘The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Samsung Kies on your PC or visit a customer service center.

Rooted N910TUVU1ANJ7 t-mobile Galaxy Note 4

That simply means that the device could not get the software update anymore. So the best shot here is you need to remove root from the device by flashing back the stock firmware.

Frequently Asked Questions About Stock Firmware:

Q: Will I lose root once installed the N910TUVU1COD6 update?
A: Yes, this will restore your device into the official firmware.

Q: Can I install root again once upgraded to N910TUVU1COD6 5.0.1 Lollipop version?
A: Yes, this firmware build can be rooted, but be aware about the new KNOX security platform hidden inside the system that completely voids the warranty of your device once gets tripped by means of rooting or installing any custom recovery. This sets “KNOX warranty Void: 0×1 from 0×0″ (You can see this when you set your device in download mode). This cannot be reset by any means.


Before you proceed prepare these necessary things as follows so you’ll not screwed-up your phone:
• Create a backup of all your personal data, like Contacts, Messages, Applications, Pictures, and Videos, so that you will not lose it just in case something might go wrong after the update.
• Make sure that your T-Mobile Samsung Galaxy Note 4 SM-N910T battery is fully charged to ensure stability and to get rid pf power failure issues while updating.
• Close all software, such as KIES suite, Antivirus, firewalls, to prevent the possible conflict.
• Prepare a personal computer or laptop with Windows OS.
• Enable USB debugging mode if you are having issues connecting your device to the computer try to enable this option. In your T-Mobile Samsung Galaxy Note 4 SM-N910T, go to Settings>> About device>> then look for the firmware build number and then tap that build number for around 7-times until a message pop-up that says something like “congratulations you are now a developer”.
• TURN OFF the Reactivation Lock – from Home screen tap on Settings>>Security>>Reactivation Lock and then uncheck the Turn Reactivation lock on. This is only needed if you already turned it ON, from which you cannot modify the system when it’s turned-ON.

Galaxy Note 4 reactivation lock turn off

Grab these necessary tools

Odin downloader – Odin3_v3.07 or Odin3_v3.09 here
A USB Driver – drivers are here (only needed if you haven’t installed the latest Kies 3)
Stock Firmware 5.0.1 N910TUVU1COD6 Download page
Important Note: This stock firmware can be use only on top of any older software updates. You should not use the stock firmware for downgrading purposes on top of any newer software updates, including but not limited to such as much higher and latest than N910TUVU1COD6 and future Android 5.1.1 Lollipop updates. Doing so may result into undesirable outcomes due to the new secured operating system. This specified stock firmware or so-called stock ROM is only compatible for T-Mobile Samsung Galaxy Note 4 SM-N910T specific model only. Do not ever try to use this firmware on other Samsung Galaxy Note 4 variants, including other brands and model numbers.

Extract/Unzip the download stock firmware

Extract the downloaded N910TUVU1COD6 firmware or stock ROM. Use WinZip, 7zip, Winrar or any decompressing program you have had in your computer.

Run and Configure Odin Flasher

Run Odin3_v3.07 flasher program. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

Load the N910TUVU1ANK4 stock firmware

3) Just click on the AP button then select and load the N910TUVU1COD6 stock firmware.

It reads out like this – ‘N910TUVU1COD6_N910TTMB1COD6_Home.tar.md5′

Once loaded you need to wait for a while as it reads out the MD5 checksum for compatibility.

Reboot the Galaxy Note 4 in Download Mode

Reboot the T-Mobile Samsung Galaxy Note 4 SM-N910T into Download Mode: Turn it Off first. Now Press and hold the Volume Down, HOME and Power ON button at the same time). You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears.

Connect the Note 4 into a computer

Connect the Galaxy Note 4 to the computer using the supplied USB data cable. In Odin window, the ID: COM box will turn to a bluish color when the phone is properly connected and an indication that its recognized with Odin. It also states as “Phone Added! in the log cat.

Begin Flashing

When all is set and ready to begin flashing; Tick the ‘START’ button located at the lower part of Odin.

Avoid Interrupting the process

DO NOT disconnect nor do anything when the phone is already in flashing mode. You’ll messed up the phone if you accidentally interfere the installation. Wait until a word “PASS” appears on the left side of the Odin screen, it is an indication that the installation successfully completes. (If you get failed errors, check the USB connection condition, repeat the whole process)

Wait until it says Pass!!

Wait until the phone completely reboots, then unplug it from the computer

Troubleshooting when firmware flashing failed

Do a factory reset after flashing especially when your device previously runs on any unofficial firmware. This is process is optional, but this method can get rid o unwanted boot loop and lag issues experiences after flashing. To do this;

Press and hold Volume Up+ Home+Power button, then select the Wipe Data/Factory Reset, to gain a fresh firmware installed.

If you use this for unrooting and restoring back from custom ROM but cannot get through the during the flashing and you get Odin failed error. You may just repeat the process but make sure to check everything from USB data cable, computer’s USB serial port, USB driver try the other Odin version. You may also sort out what root kernel and custom ROM and any modified system images you have previously used before as it also causes a flashing failure.

If you have something to add and or in need for assistance, just drop it on the comment form below.


Post a Comment