Wednesday, August 12, 2015

Install G900TUVU1FOG6 T-Mobile Galaxy S5 Official 5.1.1 Lollipop Stock Firmware

T-Mobile Samsung Galaxy S5 SM-G900T, G900TUVU1FOG6 Android 5.1.1 stock firmware. The G900TUVU1FOG6 5.1.1 update contains the Stagefright fix, an advanced messaging feature, and the fix to Swipe issue when deleting and typing letters. The latter is officially rolled out via Over-The-Air OTA update and or by using Samsung Kies. But to those who got a rooted and a modified Samsung Galaxy S5 SM-G900T, the chances is, you cannot get the official update anymore. But if you want to restore back to the official firmware then you can manually install the original G900TUVU1FOG6 5.1.1 update itself, using the stock firmware method.  Just read on for the step by step guide below.
G900TUVU1FOG6 Tmobile galaxy s5

Technical Details of G900TUVU1FOG6 5.1.1 Firmware:

Device name: Galaxy S5
Model number: SM-G900T
Android version: 5.1.1
Baseband version: G900TUVU1FOG6
Kernel Version: 3.4.0-5406928
Build Number: LMY47X.G900TUVU1FOG6

G900TUVU1FOG6 Changelog:

 Feature and Improvements

  • Advanced messaging

  • Letters delete or won’t type with Swype

  • Stagefright fix

Previous OTA updates:

  • G900TUVU1FOF6

  • G900TUVU1DOB1

  • G900TUVU1CNK2

  • G900TUVU1BNH5

  • G900TUVU1BNG4

  • G900TUVU1BNG3

  • G900TUVU1BNF6

  • G900TUVU1ANE6

  • G900TUVU1ANE5


Again, the G900TUVU1FOG6 can be downloaded via OTA update or through Samsung Kies if your Galaxy S5 has not been rooted and or modified.

Escalate to T-Mobile support page –

Below are the official firmware build G900TUVU1FOG6 5.1.1 t for advanced users that cannot update their devices beforehand as it was already modified and now wants to manually update using the stock firmware.

How to Manually Install the G900TUVU1FOG6 5.1.1 Stock Firmware


• Make sure that your Samsung Galaxy S5 SM-G900T is recharge for at least 40% remaining battery power.

• Stock Firmware packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your stored data) but it is highly recommended to make a backup all important files stored from your phone’s internal memory – contacts, messages, etc. before flashing no-matter if it is Full-WIpe or Non-Wipe, just to be safe and ensure that your stored data are in safe if something went wrong during the flashing process.

• Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port. Odin will not work on MAC OS.

• Use the supplied USB cable for your Samsung Galaxy S5 SM-G900T.

• Enable USB debugging from your phone’s settings – Settings>>About Phone>> then scroll down to the build number and tap that number for around 7-times ’til the Developer option appears.

• Ensure that KIES is closed and not running in the system tray! Kies and Odin are both created by Samsung, but Kies will interrupt and doesn’t like Odin, it will block you from flashing.

Important Note: The Android 5.1.1 firmware has a protected bootloader that might cause issues when you try to downgrade to the old software updates. This also applies if you are into rooting and installs any custom recovery or any unsigned firmware once you are on 5.1.1 Lollipop, so please be aware with that.

Download the G900TUVU1FOG6 5.1.1 firmware:

SM-G900T T-Mobile S5 – G900TUVU1FOG6 Stock Firmware Download – (link)

The Tools:

Odin3.v3.09 find it here

USB Driver - find it here

Install the Samsung Galaxy S5 SM-G900T USB driver

Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in zip file, so that you’ll get the tar.md5 file.

Run and Configure Odin

Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3) , ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot your Samsung Galaxy S5 SM-G900T into Download Mode

To reboot the Samsung Galaxy S5 SM-G900T into download mode, you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop

Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.

In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the stock G900TUVU1FOG6 5.1.1 firmware file

The stock firmware is packed in a single .tar.md5 file only. Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.

“G900TUVU1FOG6_G900TTMB1FOG6_G900TUVU1FOG6_HOME.tar .md5″

Start Flashing the stock firmware

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the flashing process, such as disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until you see a ‘PASS!!’ message

When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing already finishes, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

Confirm if you successfully installed the stock firmware

Go to Settings>About Phone>Firmware info.

Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolved it.

Q: I got an error message that says “Set-up connection Failed” ?

A: 1. Check your USB connection from the phone to PC,

2. Connect to another PC USB port

3. Check and or try to another USB cable

4. Re-install the USB driver.

Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, it isn’t responding at all?

A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs. Also try to use another computer or laptop,

Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?

A: This eventually happens if your device came from custom firmware but you can fix it via recovery mode option, do this:

Boot in recovery mode

1. Press and hold Volume Up, Home and Power button.

2. Use volume keys to select, Up and Down and Power or Home key to select the option

3. Select Wipe Data/Factory Reset using the Home button.

4. Next select the Wipe Cache Partition

5. Lastly, select Reboot System Now to reboot your Samsung Galaxy S5 SM-G900T in Normal mode.


Post a Comment