Saturday, April 23, 2016

Install G900IDDU1CPD1 Official Android 6.0.1 Marshmallow on Samsung Galaxy S5 SM-G900I

The official Android 6.0.1 Marshmallow update on Samsung Galaxy S5 SM-G900I has arrived. The first released build is G900IDDU1CPD1 and recently rolled out in India. For those who have a rooted or modified Galaxy S5 SM-G900I  that may need to manually upgrade using the official or stock firmware G900IDDU1CPD1 itself, then you may just grab it here. The released was taking a little bit so slow and only available for select countries only. So if you want to give it a try to or if you want to upgrade your device right now, you may just follow our step by step guide.

In addition, the Android MM G900IDDU1CPD1  is compatible to all Galaxy S5 SM-G900I models. It means you can install it as long as you have the SM-G900I specific variant. This also useful for those who have a rooted and modified Galaxy S5 SM-G900I that might not get the update via Over-The-Air (OTA) and even thru Kies or Smart Switch for PC. Flashing the stock firmware is your only resort to get the said Marshmallow update.

Android 6.0.1 Marshmallow release build G900IDDU1CPD1 - Technical Details :

  • Device name: Samsung Galaxy S5 (4G-LTE)

  • Model number: SM-G900I

  • Android version: 6.0.1 (Marshmallow)

  • Android security patch level: 2 April, 2016

  • Baseband version: G900IDDU1CPC1

  • Kernel version: 3.4.0-7747438

  • Build number: MMB29M.G900IDDU1CPD1

  • AP: G900IDDU1CPD1


  • CP: G900IDDU1CPC1

Download G900IDDU1CPD1 Android 6.0.1 Marshmallow Stock Firmware :

CountryCSC - Firmware Download
IndiaINU - (Download) *This is the unlocked version and are compatible for all Galaxy S5 SM-G900I.
IndiaINS - (Download) *This is a branded version and are only suitable for network locked devices in India alone.

If you haven’t touched your phone you can do the update automatically via Over-The-Air or using Smart Switch for PC. All you need is to do is to simply tap on your phone Settings > About device > Software update > Check for an update. You may also use Kies or Samsung Smart Switch for PC if you choose to update while connecting the phone in to a PC..

How to Manually Install the G900IDDU1CPD1 6.0.1 Marshmallow Firmware Update on Samsung Galaxy S5 SM-G900I

  • Make a full backup of all important data stored from your phone and saved it in your computer. I highly recommend this as we are going to perform a full factory data reset.

  • Perform a Full wipe factory data/reset before and after flashing so your phone cache will be cleaned-up and help get rid of lag issues once the installation is finished. Read at the bottom of this post for performing a factory reset.

  • Re-charge your phone’s battery.

  • Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB data cable.

  • Use the supplied USB cable for your Samsung Galaxy S5 SM-G900I. Enable USB debugging from your phone’s settings – Settings > About Phone, then scroll down to the build number and tap that number for around 7-times ’til the Developer option appears. Hit back to Home > Settings > Developer option > Enable USB debugging.

  • TURN OFF the Reactivation Lock – This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON. Go to Settings>>Security>>Reactivation Lock and then uncheck the Turn Reactivation lock on.


Q: My Samsung Galaxy S5 SM-G900I is rooted, will I lose root once I have installed the Marshmallow update?

If your device is currently rooted you will lose root after flash, but you can still root it again if you want.

Q: Will this method triggers KNOX Warranty counter to 0x1?

No, this is an official and signed Android 6.0.1 Marshmallow firmware released by Samsung, so flashing the official firmware will not harm KNOX warranty void flag.

The Tools:

Odin3_v3.10 (grab it here) and the USB Driver (grab it here)

Install the Samsung Galaxy S5 SM-G900I USB driver.

Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in ZIP so that you’ll get the tar.md5 file.

Run and Configure Odin.

Run Odin downloader Odin3_v3.10 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3), ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot your Samsung Galaxy S5 SM-G900I into Download Mode.

To reboot the Samsung Galaxy S5 SM-G900I  into download mode, you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. he download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop.

Once you already reboot the phone in download mode, simply connect the phone to your PC.

In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a message says “Added” on a log cat box will prompt you that the device is already detected or recognized by Odin. If you do not see a COM port number in Odin then there’s something missing or wrong. You may read again from the top of this post.

Load the stock G900IDDU1CPD1 Android 6.0.1 Marshmallow firmware.

The stock firmware is packed in a single .tar.md5 file only. Simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.


Start Flashing the G900IDDU1CPD1 stock firmware.

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until you see the PASS!! message.

When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing is finished, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

How to get rid of lag issues and achieved a more stable Android 6.0.1 Marshmallow on your Galaxy S5

Some folks might miss this part, then there goes this lag problem here and there. This will also affects the battery life performance. So it is much better to perform a full wipe and factory reset once before and after flashing a stock firmware. This will not just avoid getting into any issues, but you can also achieved a cleaner and fresher firmware installation. Just do make sure you all important data has a backup copy and already saved in safe place before doing this.

Performing Full Wipe Data/Factory Reset on Samsung Galaxy S5 in Recovery Mode

  1. Press and hold Volume Up, Home and Power button.

  2. Use volume keys to select, Up and Down and Power or Home key to select the option

  3. Select Wipe Data/Factory Reset using the Home button.

  4. Next select the “Wipe Cache Partition”.

  5. Lastly, select “Reboot System Now” to reboot your Samsung Galaxy S5 SM-G900I into the normal rebooting mode.

That’s all!


Post a Comment