Thursday, April 14, 2016

Install Stock G928PVPU2BC3 Official Android 6.0.1 Marshmallow for Sprint Galaxy S6 Edge+ SM-G928P

Sprint Galaxy S6 Edge+ SM-G928P has gotten its Android 6.0.1 Marshmallow update bumping firmware build version to G928PVPU2BC3. Those who might have a rooted or have their S6 edge+ being modified and were unable to get the update, you may just grab the stock firmware itself and install it manually onto your device.  This process will restore back your phone to its official firmware and will also manually upgrade to Marshmallow in not time.  Just keep in mind it will remove the root accesse that you have previously installed as the phone will then set back to its factory default settings.

If ever you have the Galaxy S6 SM-G920P or the Galaxy S6 edge SM-G925P, you may also find each Android 6.0.1 Marshamallow stock firmware here:


Again, keep in mind that installing the stock firmware will restore back your phone to official default OS, and that’s simply means that you’ll lose root and any unofficial modification you have had installed in your phone once the firmware are being restored.

Technical details: Firmware build G928PVPU2BC3, Android 6.0.1 Marshmallow

  • Model number: SM-G928P

  • Android version: 6.0.1 (Marshmallow)

  • Android security patch level: March 01, 2016

  • Baseband version: G928PVPU2BC3

  • Kernel version: 3.10.61-7231607

  • Build number: MMB29K.G928PVPU2BC3

  • AP: G928PVPU2BC3

  • CSC: G928PSPT2BC3

  • CP: G928PVPU2BC3


  • OS upgrade – Android 6.0.1 Marshmallow.

  • The new TouchWiz provides enhanced usability and an updated visual design.

  • Quick connect helps you easily find and connect to nearby devices and pre-connection.

  • Fingerprints are securely protected. An alternative unlock method (pattern,PIN, or password.

  • Advanced power saving mode restricts background data and extends battery life.

  • A new vibration pattern concept has been applied

Addressed at Sprint Galaxy S6 edge+ support page.

Download G928PVPU2BC3 Android 6.0.1 Marshmallow Stock Firmware

Important: This stock firmware is for Sprint Samsung Galaxy S6 Edge+ SM-G928P (U.S.A.) version only. DO NOT ever use it on any other Galaxy S6 Edge variant such as the SM-G928A (AT&T), SM-G928T (T-Mobile), SM-G928V (Verizon), SM-G928F and SM-G928I international version, and including those in Canada (SM-G928W8).

Important Note:

  • Make a full backup of all important data stored from your phone and saved it in your computer. I highly recommend this as we are going to perform a full factory data reset, wipe cache to obtain a fresher and clean installation. Don’t be lazy.

  • Perform a Full wipe factory data/reset before and after flashing so your phone’s memory cache will be cleaned-up as those remained data out there will cause trouble. This resolves and help to get rid of lag issues once the installation is finished. Read at the bottom of this post on how to perform a factory reset.

  • Re-charge your phone’s battery, fully charge just to make sure.

  • Use a PC with perfectly working USB serial port.

  • Use the supplied USB cable for your Samsung Galaxy S6 Edge.

  • Enable USB debugging from your phone’s settings – Settings > About Phone, then scroll down to the build number and tap that number for around 7-times ’til the Developer option appears. Hit back to Home > Settings >Developer option > Enable USB debugging.

  • TURN OFF the Reactivation Lock – This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON. Go to Settings>Security>Reactivation Lock and then uncheck the Turn Reactivation lock on.


Q: My Samsung Galaxy S6 Edge is rooted, will I lose root once installed the official firmware?
If your device is currently rooted you will lose root after flash, but you can still root it again if you want.
Q: Will this method triggers KNOX Warranty counter to 0x1?
No, this is an official and signed Android 6.0.1 Marshmallow firmware released by Samsung, so flashing official firmware will not harm KNOX warranty void flag.

Disclaimer: Use of this method is solely at your own risk! Please proceed with precautions, for we will not take any responsibility if anything happens to your device by using this guide.

How to Flash the Android 6.0.1 Marshmallow, Firmware build G928PVPU2BC3?

Grab The Tools:
Odin3_v3.10 (grab it here)

A USB Driver if you have not yet installed Kies 3 (grab it here)

Install the Samsung Galaxy S6 Edge USB driver.

Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in a (zip) so that you’ll get the (tar.md5) file.

Run and Configure Odin.

Run Odin multi-downloader Odin3_v3.10 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3), ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot the Samsung Galaxy S6 Edge into Download Mode.

To reboot the Samsung Galaxy S6 SM-G928P into download mode, you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The downloads mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect the SGS 6 Phone to PC.

Once you already reboot the phone in download mode, simply connect the phone to your PC.

In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a message says “Added” on a log cat box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the stock G928PVPU2BC3 Android 6.0.1 Marshmallow stock firmware.

The stock firmware is packed in a single .tar.md5 file only. Simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.

“ G928PVPU2BC3_G928PSPT2BC3_G928PVPU2BC3_HOME.tar.md5″

Start on Flashing the G928PVPU2BC3 stock firmware.

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM. Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finishes.

Wait until you see the PASS!! message.

When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing already finishes, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

How to get rid of lag issues and achieved a more stable Android 6.0.1 Marshmallow on your Galaxy S6 Edge.

Some folks might miss this part, then there goes this lag problem here and there. This will also affect the battery life performance. So it is much better to perform a full wipe and factory reset once before and after flashing a stock firmware. This will not just avoid getting into any issues, but you can also achieve a cleaner and fresher firmware installation. Just do make sure you all important data has a backup copy and already saved in a safe place before doing this. This process does not cover on any outdated apps that cause incompatibility issues on Android 6.0.1 Marshmallow OS, all you need is find any updates on that particular apps to fixed any issues.

Performing Full Wipe Data/Factory Reset on Samsung Galaxy S6 Edge in Recovery Mode

1. Press and hold Volume Up, Home and Power button.

2. Use volume keys to select, Up and Down and Power or Home key to select the option

3. Select Wipe Data/Factory Reset using the Home button.

4. Next select the “Wipe Cache Partition”.

5. Lastly, select “Reboot System Now” to reboot your Samsung Galaxy S6 Edge G928P in Normal mode.

More workarounds if ever encountered:

Some apps has FC’s and lag issues.

Individual apps requires an update prior to Android 6.0.1 Marshmallow compatibility or otherwise it just causes the problem. Once the update has made, you might also check on all apps first if it still runs perfectly.


Post a Comment