Sunday, January 15, 2017

Galaxy A3 2016 SM-A310F Official Android Marshmallow Stock Firmware A310FXXU2BPH8

Here goes Samsung Galaxy A3 2016 SM-A310F official Android 6.0.1 Marshmallow stock firmware. These were very useful for those who might need it just in-case one want might want to unroot the device and restore it back to official default firmware settings from custom ROM or any modified system images. These were also the handy tools you might need for fixing unwanted soft-brick during rooting or modification attempts. The stock firmware itself can repair the Galaxy A3 2016 SM-A310F if it has suffered from bootloop, stuck on Samsung logo and other problems.
Galaxy A3 Marshmallow Firmware version A310FATO2BPI8

What's new in Android 6.0.1 Marshmallow?

  • OS Ugrade to Android 6.0 Marshmallow

  • The new TouchWiz interface is more user-friendly and offers a new visual design

  •  The Quick Connect feature allows you to find nearby devices and easily connect to them by viewing currently connected devices and previous connections

  • The fingerprints are protected. An alternative unlock method (template, PIN, or password) is required to add fingerprints

  • Advanced Power Saving mode restricts data in the background and extends battery life

  • A new concept of vibration model has been applied

  • The settings of the following items have been reset: Theme, E-mail, Icon / Widget

How to Install Galaxy A3 2016 SM-A310F Stock Firmware

Step 1: Download the latest Galaxy A3 2016 SM-A310F Stock Firmware:
All of these packages are compatible to all Galaxy A3 2016 SM-A310F around the world.
- Galaxy A3 SM-A310F Stock Firmware Downloads

Step 2: Prepare things  as follows:Grab the relevant tools for flashing Galaxy A3 2016 SM-A310F Stock Firmware
– Odin3_v3.07 Flasher tool Odin3_v3.11.1
– Samsung Galaxy A3 USB driver, Download

– Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port.
– Use the USB cable wire for your Galaxy A3.
– Make sure that your Galaxy A3 battery is fully charge.
– Back up all important files stored from your phone’s internal memory – contacts, messages, etc.
– Remember or back up the APN settings of your device.
– Enable USB debugging from your phone’s settings. Go to Settings > Applications > Development, and tick the box that says ‘Enable USB Debugging’.
– Do a “Hard Reset” if you have a lot of 3rd party applications installed from your phone, this is useful to gain a smooth flashing. (Just make sure that you already back up all your important files before resetting your device.

Step 3: Extract or unzip the downloaded stock firmware so that you’ll get the Odin flashable .tar.md5 file. Use Winzip, winrar, 7zip or any extracting tool you had in your computer.
Step 4: Run and Configure Odin
Run Odin downloader on your computer’s desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked. Leave the ‘AUTO-REBOOT and ‘F.RESET TIME’  remains checked.
Now, click on the PDA button, then select and load the tar file that you have previously extracted.

Odin sample only:

I9100XXLS8 odin stock install

Step 5: Reboot the Galaxy A3 into Download Mode.
To boot your Galaxy A3 in download mode, just simply switch it off then gently press and hold the “POWER, VOLUME DOWN and HOME” buttons simultaneously. You’ll be then prompted in a warning screen to continue or cancel.

Step 6: Connect the Phone to the Computer or Laptop
Once the phone screen shows in downloading mode, connect your phone to the PC with the USB cable. You’ll then notice the upper box in Odin that turns in yellow color., it also indicates the COM:ID where the device is being detected and a word “added!!’ on the log box. If somehow those things never showed up, check out the USB cable connection, read again from the top of this post.
Step 7: Begin Flashing!
Once all set and ready, hit he “START” button to begin flashing.
Do not touch anything that might interrupt the process to avoid any fatal errors or failures, it may ruin your device if any interruption occurs while already in flashing status.

It may only takes about 3 to 5 minutes, depends of your PC/laptop speeds. A word “PASS” will display in Odin once it finishes. If somehow you will not get the word “PASS” or just stuck in a long time. Disconnect the phone, remove battery, re-insert it, check the USB connection, re-install the driver, disable Kies and any anti-virus. Set the phone in Download mode again, and repeat the whole procedure.

The phone will just automatically reboots if the firmware flashing successfully completes. Just wait until it boots up on the “S” logo for a while then into an android update screen. If it still shows boot logo try rebooting and if it stays there, you need to wipe your phone.

Fixing possible issues after flashing like bootloops or just stuck in welcome screen logo

Boot in recovery mode – Press and hold Volume Up, Home and Power button. Use volume keys to select up and down and power or home key to select the option.

1. Select Wipe Data/Factory Reset
2. Next select the Wipe Cache Partition
3. Lastly select Reboot System Now to reboot your Galaxy A3 in Normal mode.
Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.
Check and reconfigure your APN settings when data networks connection issues encountered.

Change the default text to your own or desired language

The default language of this firmware varies according to which country specific software build you have installed, but it has all major languages around the world included. You can just simply change it from your device Settings>> Language and Text input.

All Included languages:

  • Catala

  • Cestina

  • Dansk

  • Deutsch (Deutschland)

  • Deutsch (Osterreich)

  • Deutsch (Schweiz)

  • Eesti

  • English (Australia)

  • English (New Zealand)

  • English (United Kingdom)

  • English (United States)

  • Espanol (Spania)

  • Espanol (Estados Unidos)

  • Euskara

  • Francais (Belgique)

  • Francais (France)

  • Galego

  • Hrvatski

  • Icelandic

  • Italiano

  • Kazakh

  • Latviesu

  • Lietuviu

  • Macedonian

  • Magyar

  • Nederlands (Belgie)

  • Nederlands (Nederland)

  • Norsk bokmal

  • Polski

  • Portugues (Brasil)

  • Portugues (Portugal)

  • Romana

  • Slovincina

  • Slovescina

  • Srpski

  • Suomi

  • Svenska

  • Turkce

  • Uzbek

  • Russian

  • Chinese

  • Korean

  • Japanese

  • others which I can’t read

That’s it! Your Samsung Galaxy A3 should now runs in official Android Marshmallow. If this helps you then simply share us some love by hitting our like and share buttons. If you also have something to add, your comments and suggestions are most welcome here.


Post a Comment