Friday, March 17, 2017

G930VVRU4BQA2 Android 7.0 Nougat Verizon Galaxy S7 SM-G930V Firmware

Here we got the official Android 7.0 Nougat firmware version G930VVRU4BQA2 for Verizon Galaxy S7 SM-G930V. The G930VVRU4BQA2 is the first Nougat firmware build for big reds' Galaxy S7 and were officially released on March 6, 2017. So those who might have not been able to get the OTA update and might need the firmware itself, just simply grab it and manually install it into the device. This method is called the manual firmware flashing to the device.

Android 7.0 Nougat Firmware G930VVRU4BQA2 info

  • Device: Galaxy S7 (Verizon)

  • Model number: SM-G930V

  • Android version: 7.0 (Nougat OS)

  • Android security patch level: February 1, 2017

  • Baseband version: G930VVRU4BQA2

  • Kernel version: 3.18.31

  • Build number: NRD90M.G930VVRU4BQA2

  • AP: G930VVRU4BQA2

  • CP: G930VVRU4BQA2

  • CSC: G930VVZW4BQA2

The G930VVRU4BQA2 Android Nougat firmware can be installed on top of either if your Galaxy S7 is currently rooted, and or running at a Custom ROM, Nougat beta, and any Android 6.0.1 Marshmallow version. This process will not knock down the KNOX apps since it is an official firmware build, but it will not reset the KNOX counter if it has been tripped-off before when you have had your device rooted and modified.

Grab These Tools

  1. Odin3_v3.11.1 downloader or the latest version – This is best for flashing the Android 6.0.1 Marshmallow stock firmware

  2. Samsung USB Driver – only needed if you haven’t installed the latest Samsung Smart Switch in your PC.


Before proceeding prepare these necessary things as follows so you’ll not messed-up your phone if something might went wrong:

Backup all your personal data – Use “Samsung Smart Switch for PC (Google it) to easily make a backup of your Contacts, Messages, Applications, Pictures, and Videos, so that you will not lose it. You must do this because the recent firmware packages will wipe out your device stored data.

Recharge the device battery – Make sure that your Galaxy S7 battery is fully recharged to ensure its stability. A power failure during the installation process may harm your device.

Prepare a PC as this process will not tend to work in Mac computers.

Enable OEM unlock mode – This thing wan’t there before during the old times, but if this feature is already enabled in your device. Just go to Settings > About device > then look for the firmware’s Build number and then tap that build number for around 7-times until a message pop-up that says something like “Congratulations you are now a developer!”. Then hit back in Settings > About device > Developer option > OEM Unlock.

Extract/Unzip the download stock firmware

Extract the downloaded firmware. Use any decompressing program you have had in your computer.

Reboot the Galaxy S7 into Download mode

Reboot the Samsung Galaxy S7 into Download Mode: Turn it Off first. Now, Press and hold the Volume Down, HOME and Power ON button at the same time. You will then presented into a “Warning Message” screen, just press the Volume Up to continue. Once the Android robot and a “Downloading” message appears. If you can’t get into it, repeat the 3-button combination again and again.

Run and Configure Odin3 Flasher

Run Odin3 flasher program. In Odin window DO NOT tick the option box that says ‘Re-Partition’. Leave ‘Auto Reboot’ and ‘F.Reset Time’ check-marked by default.

Load the firmware G930VVRU4BQA2 binary tarballs in Odin designated slots such as: the “BL” (bootlooder) file goes to the “BL button/slot“, same goes about the “AP” (phone), “CP” (modem) and the “CSC” (consumer code) files. Once loaded, you need to wait for a while as Odin3 will check the files compatibility and authenticity.

  • BL_ G930VVRU4BQA2 _user_low_ship_MULTI_CERT.tar

  • AP_ G930VVRU4BQA2_user_low_ship_MULTI_CERT.tar

  • CP_ G930VVRU4BQA2 _user_low_ship_MULTI_CERT.tar

  • CSC_VZW_ G930VVZW4BQA2 _user_low_ship_MULTI_CERT.tar

Connect the Galaxy S7 into the computer

Connect the Galaxy S7 to the computer using the supplied USB data cable. In Odin window, the ID: COM box will turn to a bluish color when the phone is properly connected and it’s an indication that it’s recognized with Odin. It also states as “Phone Added! in the log-cat.

Begin flashing the stock firmware

When all is set and you are ready into flashing just simply tick the ‘START’ button located at the lower part of Odin.

Wait until it says Pass!!

Odin3 will display a message that says “PASS!” when the process finishes. Wait until the phone completely reboots, then unplug it from the computer. However, if you might get the error message “FAILED!” you may check the troubleshooting procedures down below.


Perform factory data reset or wipe data cache partition once a fresh firmware were installed. This method can fix any lag issues. To do this, just press and hold the Volume Home, HOME and Power ON button at the same time while the phone is turned OFF, then select Wipe Data/Factory Reset. You may also proceed to Wipe Wipe System Cache/Partition if some issues still exists.

Also, you must update all of your pre-installed apps in the phone, as it also causes some problems on Nougat OS. That’s all folks!


Post a Comment